AASTRA 6700i for OpenCom 1000 User Guide EN - Manual (Page 16)

Using the Aastra 673xi / 675xi
12
Taking a Call from Another Terminal (Take)
You can accept an ongoing call from another terminal on your Aastra 673xi / 675xi
and continue it there. To be able to do so, your telephone and the other terminal
have to have the same internal call number. To do so, a Take function key must be
configured on the Aastra 673xi / 675xi (see Web Configurator of the
OpenCom 1000 starting on page 28).
To accept the call on the Aastra 673xi / 675xi you:
■ pick up the handset and press the Take function key or
■ – when the handset is not picked up – press the Take function key to accept
the call in the handsfree mode (please refer to page 16).
Accepting a Call for Another Terminal (Pick-up)
You can accept a call for another telephone in your Pickup group. To do so, a Pick-
up function key must be configured on the Aastra 673xi / 675xi (see Web Configu-
rator of the OpenCom 1000 starting on page 28).
Another telephone in your Pickup group is ringing. When your telephone is idle,
the call number / the name of the caller and the called pick-up group member are
displayed. To accept the call, you:
■ pick up the handset and press the Pick-up function key or
■ – when the handset is not picked up – press the Pick-up function key to accept
the call in the handsfree mode (please refer to page 16).
If you are telephoning and would like to accept a call using Pickup …
1. Press an unassigned trunk key, e.g. trunk key 2 .
The person calling is put on hold and now hears music on hold.
2. Press the Pick-up function key.
3. You can also toggle back and forth between callers or initiate a conference
with both callers (please refer to page 14 also).
Ending a Call
To end a call you do as follows:
■ Put down the handset.
or
■ press the Goodbye key .