AASTRA 4220 Lite for BusinessPhone User Guide EN - Manual (Page 40)

Call Forwarding
BusinessPhone – Dialog 4220 Lite / Dialog 3210 40
Program and activate a new External Diversion address
To set a new Individual External Diversion address: *22*
Dial.
0 z
Dial the digit(s) for external call access and enter the new
External Diversion address.
A maximum of 24 digits.
Note: If your public network requires waiting for a second
dial tone, press
*
. #
Press to activate the Individual Diversion.
Verification tone. í
Press to finish the procedure.
Notes: Before you leave, call your extension to check if the
External Diversion has been set up correctly. This way you
can make sure that the number has been programmed
properly and that your calls will not be diverted to another
person by mistake.
Individual External Diversion can also be used via the DISA
function, see section “ Other Useful Features ” on page 71.
Cancel External Diversion #22#
Dial.
í
Press.
Note: The programmed diversion address is not removed
from the memory, the diversion is just inactive.
Re-activate External Diversion
Divert your calls to an external position. *22*#
Dial to activate the programmed External Diversion.
You can make outgoing calls as usual. A special dial tone reminds
you that Call Forwarding is active. í
Press.