Select system to unsubscribe, and press select, 4 renaming a system, Press menu, select , and press select – AASTRA DT690 for BusinessPhone User Guide EN User Manual

Page 106: Select system, and press select, Select rename system, and press select, Select a system from the list, and press edit, Enter the new name, Press save to save the changes, Press back to exit the menu, 3 in charger

Advertising
background image

1424-EN/LZT 103 092 Uen D 2010-02-12

106

C

ONNECTIONS

Note: It is not possible to unsubscribe a protected system via the
System menu. For more information, contact the system admin-
istrator.

4.

Select system to unsubscribe, and press Select.

A control question whether to unsubscribe or not is asked, press
Yes to confirm.

Note: It is not possible to delete a protected subscription from the

System menu. Contact the system administrator if you need to
delete a protected subscription.

18.2.4 Renaming

a

System

It is possible to change the name of the system in the phone.
To rename a system, do the following:

1.

Press Menu, select

, and press Select.

2.

Select System, and press Select.

3.

Select Rename System, and press Select.

4.

Select a system from the list, and press Edit.

5.

Enter the new name.

If no name is entered, the phone will use the default name, “System
A” or “System B”, or other, depending on which system is free.

6.

Press Save to save the changes.

7.

Press Back to exit the menu.

18.3 In

Charger

When your cordless phone is placed in a charger, incoming calls can be
redirected to another extension. The phone can also be muted, or
switched off while in the charger.

18.3.1

Redirecting Calls and Messages While Charging

Note: If the cordless phone is logged on as secondary phone in a

Tandem configuration and placed in the charger, incoming calls
will further on be presented on the primary phone and not be
diverted.

Advertising