AASTRA 610d for Aastra 400 User Manual EN - Manual (Page 36)

Supplementary features
36
eud-1290/1.0 – R1.0 – 01.2011
Receiving an announcement
Your phone rings once and then automatically initiates the announcement. The dis-
play shows . You will be addressed via your loudspeaker.
You can listen to the announcement or stop it.
Private call with PIN
You want to make a private call on your phone or on a third-party phone.
With the aid of your PIN you can use any phone to make an external call with your
own personal settings, even if that phone is locked for external calls. The called party's
display shows your personal phone number and not the number of the phone from
which you are making your call. Any call charges incurred will be charged to you.
The call number dialled is not stored in the last-number redial list.
To continue the announcement as a phone call:
Press the Call key.
➔
You are now connected to the person who initiated the announcement.
To stop the announcement:
Press the End key.
<Setting value> 1. Enter procedure #46 followed by your internal call number.
2. Enter your PIN.
3. Enter the external call number directly, without the exchange access digit.
Press the Call key.
➔
The phone is now enabled. The external user is called.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter
"Changing the User PIN" , page 75 or use */#
procedure *47 (see "User’s Guide */# Procedures" on the Aastra document
portal:
www.aastra.com/docfinder ). If you have forgotten your PIN, your system
administrator can reset it to the default setting.