Activating ring alone, Activating, Ring alone – AASTRA 610d for Aastra 400 User Manual EN User Manual
Page 56: Supplementary features
Supplementary features
56
eud-1290/1.0 – R1.0 – 01.2011
Activating ring alone
You want to specify which of your phones shall ring acoustically when you receive a
call.
When your system administrator has set up a phone number with several phones, you
can define on which phones a call shall acoustically be signalled using ring alone.
When you have activated ring alone on a phone, the acoustic ringing tone is deacti-
vated for all other phones ( ). An incoming call is signalled in the display of all
phones. You can answer the call on each of your phones.
This function must be stored under a function key (see chapter
,
).
Note:
When you have activated ring alone but deactivated the personal call routing for a
phone in parallel, an incoming call is not acoustically but only visually signalled.
In the idle state:
Press the function key for
<Ring alone>
.
➔
Ring alone is activated/deactivated.