Setting the led indicator, Setting the volume, Setting the volume during a call – AASTRA 610d for Aastra 400 User Manual EN User Manual
Page 70: Personalizing your phone
Personalizing your phone
70
eud-1290/1.0 – R1.0 – 01.2011
Setting the LED indicator
You want the attention LED to inform you of any phone incidents.
You can activate or deactivate the following settings:
•
In Service
: The phone is switched on.
•
Incoming call
•
Info
•
Appointment call
: Function can only be set with a function code, see Chapter
, page
•
Hands-free operation
•
Battery empty
Setting the volume
All the ring tone properties are set using the profiles, see Chapter
.
Setting the volume during a call
You want to adjust the volume while in a call. You have to set the volume of handset
and loudspeaker separately.
The new volume will remain stored even after the call is ended.
Press the navigation key to the right or the
Menu
softkey.
Settings
Scroll to
Settings
and press the
Select
softkey.
LED indications
Scroll to
LED indications
and press the
Select
softkey.
<LED setting>
Scroll to the LED setting you want and confirm with the
Select
softkey.
Louder: Press top side key.
Quieter: Press bottom side key.