AASTRA 7446ip (5446ip) for MX-ONE User Guide EN - Manual (Page 20)

6/1553-DBC 446 01 Uen E8 2010-07-08 20
D IALOG 5446 D ESCRIPTION
3.8 Headset
3.8.1 Using the Headset
Using a headset enables you to make and receive calls without using the
handset.
3.8.1.1 Call Handling through the Line Buttons
By default, the phone is set to connect calls to the loudspeaker when you
answer incoming calls, or when you make calls by tapping a Line button.
This default setting is known as the loudspeaker preset mode. When you
dial a number without lifting the handset, the call is also connected to the
loudspeaker by default.
When you use a headset, you can switch to the headset preset mode to
have calls connected to the headset. If the headset preset mode is acti-
vated and you press
, the call is connected to the loudspeaker.
Make a call
Press and dial the desired
number and. In headset preset mode,
you are not required to press the
headset key.
Receive a call
Press .
Switch from headset to
handset Lift the handset.
Switch from handset to
headset
Press and replace the handset.
Clear a call Press the C key.
Activating Headset
Preset Mode To activate the headset preset mode, press
and hold down for 4 seconds. When
you hear a ring signal, and the headset icon
appears in the display to the right, the
headset preset mode is activated.
Deactivating Headset
Preset Mode To deactivate the headset preset mode,
press and hold down for 4 seconds.
When you hear a ring signal, and when the
headset icon disappears from the display to
the right, the headset preset mode is
deactivated.