3 individual authorization code procedures – AASTRA 7446ip (5446ip) for MX-ONE User Guide EN User Manual
Page 67
IP P
HONE
FOR
MX-ONE™
67
6/1553-DBC 446 01 Uen E8 2010-07-08
14.3.3 Individual
Authorization Code Procedures
If the extension you are using has an individual authorization code asso-
ciated with it, you need to follow the procedures below in order to make
calls, to lock and unlock the extension, and to change the authorization
code.
14.3.3.1 Dialing
With
an
Individual Authorization Code from Own Telephone
To make a call from an extension with an individual authorization code,
do the following:
H.323 Phones
1)
Dial * 75 * authorization code #.
75 is the standard function code for individual authorization code
dialing.
2)
When you hear a verification tone, continue to dial the external
number.
SIP Phones
1)
Dial * 75 * authorization code # and tap the Call button.
75 is the standard function code for individual authorization code
dialing.
2)
When you hear a verification tone, continue to dial the external
number.
The authorization code call will be accepted only if the authorization
code is valid.
If the category of the authorization code is too low for the dialed external
number, the call is rejected.
14.3.3.2 Dialing
with
an
Individual Authorization Code from Another Tele-
phone
To make a call from an extension with an individual authorization code
(using another phone), do the following:
H.323 Phones
1)
Dial * 75 * authorization code * DIR #.
75 is the standard function code for individual authorization code
dialing, and
DIR is your own directory number.