AASTRA 7446ip (5446ip) for MX-ONE User Guide EN - Manual (Page 43)

IP P HONE FOR MX-ONE™
43 6/1553-DBC 446 01 Uen E8 2010-07-08
7.4.1 Resuming a Call On Hold
To resume a call that has been put on hold, do the following:
1) Tap the Line button where you have the parked call.
7.4.2 Resuming a Call On Common Hold
(Available in H.323 phones only)
To resume a call that has been put on common hold, do the following:
1. Tap the Line button where you have the parked call.
If the call is picked up at the MNS represented extension the call
cannot be resumed for the parked extension.
7.5 Sending Caller Identity Code at Transfer
(Available in H.323 phones only)
When you transfer a call, you can send the caller’s Identity Code (CID)
or number to the receiver’s display by dialing a feature code during an
external call.
To send a caller identity code during an ongoing external call, do the
following:
1) Put the ongoing external call on hold by pressing Inquiry and wait
for a dial tone.
2) Dial * 77 * caller identity code or number # (1-20 digits) and wait for
a dial tone.
3) Call the third party.
4) Tap Transfer to transfer number. The ongoing call is transferred
with the caller's Identity Code or number.
Note: You can only use this feature if the receiver’s phone is
programmed to handle Identity Codes. Contact your system
administrator.
7.6 Suffix Dialing (Dialing During Speech)
H.323 Phones
When communicating with and controlling a voice mail system, or when
retrieving information about your bank account through your phone, you