AASTRA MX-ONE V4 with Exchange 2010 Quick Setup Guide - Manual (Page 20)

Quick Setup Guide
Doc. No. ASE/MXO/PLM/ 0141/ EN Rev.C Date: 01.12.2011 20/34
4 Configuration Example 2 - MX-ONE integration with
Exchange 2010 UM using TLS
4.1 Prerequisites
4.1.1 MX-ONE Prerequisites
Aastra MX-ONE Telephony System V.4.0 SP1 or later.
The following shall be configured:
• Trunk between MX-ONE and Exchange UM – SIP route configured with TLS.
• Two IP extensions numbers to be used as Pilot numbers (groups) in Exchange UM.
• Message Waiting Indicator configuration in the system and in the phones that will use the
service.
• Call list for IP phones. This feature is used to forward the call to the voice mail in case of no
answer or busy.
4.1.2 Microsoft Exchange 2010 UM Prerequisites
Same as item 2.3.2, but TLS will be used as transport protocol.
4.2 Configuration
In this configuration example, we used the following:
Direct SIP connection using TLS as transport
MX-ONE Telephony Server: