AASTRA MX-ONE V4 with Exchange 2010 Quick Setup Guide - Manual (Page 32)

Quick Setup Guide
Doc. No. ASE/MXO/PLM/ 0141/ EN Rev.C Date: 01.12.2011 32/34
7. Outlook Web Access (OWA) Play-On-Phone Feature.
a. Listen to voicemail using OWA’s Play-On-Phone feature to a user’s extension.
Listen to voicemail using OWA’s Play-On-Phone feature to an external number.
8. Configure a button on the phone of a UM-enabled user to forward the user to the pilot
number.
Press the voicemail button.
Confirm that you are sent to the prompt: “<Microsoft Exchange UM Earcon>. <User>.
Please enter your pin and press the pound key.”
9. MWI.
Ensure that a UM-enabled user’s mailbox does not have any new voice mails.
a. Dial the user’s extension and leave a voicemail. Confirm that the MWI lamp on the
phone lights up.
b. Mark the voice mail email as read in OWA. Confirm that the MWI lamp on the phone
turns off.
5.2 Additional Scenarios
1. Ensure that a Partner fax Solution is appropriately setup and UM is appropriately
configured. Send a test fax message to an user extension. Confirm that the fax is received
in the user’s inbox.
2. Setup TLS between gateway/IP-PBX and Exchange UM.
a. Dial the pilot number and logon to a user’s mailbox.
Confirm that UM answers the call and confirm UM responds to DTMF input.
b. Dial a user extension and leave a voicemail.
Confirm that the user receives the voicemail.
c. Send a test fax message to user extension.
Confirm that the fax is received in the user’s inbox.
3. Setup TLS and SRTP between gateway/IP-PBX and Exchange UM.
a. Dial the pilot number and logon to a user’s mailbox.
Confirm that UM answers the call and confirm that UM responds to DTMF input.
b. Dial a user extension and leave a voicemail.