AASTRA MX-ONE V4 with Exchange 2010 Quick Setup Guide - Manual (Page 31)

Quick Setup Guide
Doc. No. ASE/MXO/PLM/ 0141/ EN Rev.C Date: 01.12.2011 31/34
5 How to test the integration:
To execute the integration test, the configuration in both sides shall be ready.
5.1 Basic Tests
1. Dial the pilot number from a phone extension that is NOT enabled for Unified Messaging
and logon to a user’s mailbox.
Confirm hearing the prompt: “<Microsoft Exchange Earcon>. To access your mailbox, enter
your extension…”
2. Navigate mailbox using the Voice User Interface (VUI).
3. Navigate mailbox using the Telephony User Interface (TUI).
4. Dial user extension and leave a voicemail.
a. Dial user extension and leave a voicemail from an internal extension.
Confirm that the Active Directory name of the calling party is displayed in the sender
field of the voicemail message.
b. Dial user extension and leave a voicemail from an external phone.
Confirm that the correct phone number of the calling party is displayed in the sender
field of the voicemail message.
5. Dial Auto Attendant (AA).
Dial the extension for the AA and confirm that the AA answers the call.
6. Call Transfer by Directory Search.
a. Call Transfer by Directory Search and have the called party answer.
Confirm that the correct called party answers the phone.
b. Call Transfer by Directory Search when the called party’s phone is busy.
Confirm that the call is routed to the called party’s voicemail.
c. Call Transfer by Directory Search when the called party does not answer.
Confirm that the call is routed to the called party’s voicemail.
d. Setup an invalid extension number for a particular user.
Call Transfer by Directory Search to this user. Confirm that the number is reported
as invalid.