AASTRA 600d Messaging & Alerting SIP-DECT User Manual EN - Manual (Page 10)

Receiving Text Messages / Jobs
6
Audible Signalling
Received messages are signalled acoustically:
1]
The “beep” will only be signalled if you have enabled the Confirm tones setting
in the Audio > Attention tones device menu.
2]
Signalled according to the individual settings: melodies (see page 20) and
volume (see page 21)
3]
not with a Bluetooth® headset
4]
A locating alert will always be signalled via the loudspeaker, even if you have
deactivated the ringer (Off setting in the in the Audio > Ringer settings >
Device > Headset menu).
Notes on using a headset
■ If a corded headset is plugged, acoustic signalling on receipt of low priority/
normal/urgent messages will be played in the headset, according to setting
(On/Off ) in the Audio > Ringer settings > Device > Headset menu.
Acoustic signalling of incoming messages
Message type in idle mode in conversation
Information message
(e.g. news ticker) no tone no tone
Low priority message
(e.g. confirmation
message) short “beep”
1]
short “beep”
1]
Normal message / job melody played once
2]
two “beeps”
3]
Urgent message / job melody played once
2]
two “beeps”
Alarm message / job melody played until
handset user confirms or
hides the message
2]
five “beeps”, melody
played until handset user
confirms or hides the
message
2]
Locating alert increasing special
locating alert starts with signalling
tones, then warning
beeps with increasing
volume from buzzer, the
vibra call is switched on
automatically
4]