AASTRA 600d Messaging & Alerting SIP-DECT User Manual EN - Manual (Page 5)

Introduction
1
Introduction
With OpenMobility SIP - DECT, release 2.0, your system can be operated with
message and alarm solutions. Message and alarm management is possible by con-
necting external alarm servers or by using the basic functions of the OpenMobility
Integrated Messaging & Alerting service (OM IMA). In addition, the system can be
equipped with the “OpenMobility Locating application (OML)” which enables to
locate handsets accordant to the used base stations.
The Aastra 610d, Aastra 620d, Aastra 630d DECT terminals provide comfortable
features for handling messages. They are particularly suitable for use with these
Aastra applications.
Other Valid Documentation
This user guide describes the special messaging features of the Aastra 6x0d DECT
terminal series and how to use them. For the basic handset operation, please
observe also the information given in the “Aastra 610d, 620d, 630d” user guide.
Safety Instructions
Please observe the safety instructions which are accompanied with the device.
You find further important safety instructions in the elaborated user guides for the
devices. These user guides are available in the “Support” section of the Aastra
website. Please read these safety instructions first before using your handset.
Notes on Authorisations and Licences
Sending and receiving of text messages and tasks is subject to licensing and also
depends on user rights. This means, that not every subscriber in a DECT system
can use these features automatically. Ask your system administrator which par-
ticular features are enabled for your DECT handset. Sending text messages to a
FAX gateway or to an SMS gateway (for GSM phones) also requires additional
applications available on the communications system. Sending text messages to
an e-Mail gateway is possible without additional applications.