AASTRA 600d Messaging & Alerting SIP-DECT User Manual EN - Manual (Page 24)

Setting Options for Messages Receipt
20
Setting Options for Messages Receipt
For the receiving of messages different settings regarding the inbox buffer,
melodies, and ringer volume can be made.
Menu: Overwrite
The following setting applies to the buffer for the Inbox list and the Jobs list.
■ When idle, briefly press . Select Text messages > Message options >
Overwrite.
■ Press the Change softkey to switch the setting:
On: Old messages are overwritten if the buffer is full (recommended setting).
Off: New messages will not be displayed and saved if the message buffer is full.
■ Briefly press the end key to end the menu.
Up to 15 entries can be saved in your Inbox list and up to 10 in your Jobs list. If a
list is full and overwrite is disabled, an information is indicated in the idle display.
In this case you should delete entries in your Inbox and Jobs list (see page 12).
Menu: Melodies (for Message Receipt)
Received messages can be signalled by different melodies. To distinguish message
receipt from other call types, make sure to select other melodies for message sig-
nalling than e.g. for internal or external calls. For this, check the settings in the
Audio > Ringer settings > Melodies menu.
■ When idle, briefly press . Select Text messages > Message options >
Melodies or Audio > Ringer settings > Melodies.
■ Select one of the following entries: Normal message, Urgent message, Alarm
message.
■ To change the currently selected melody, press the Change softkey.
■ You can listen to the melody before saving via the softkey.
■ Save the melody via the softkey.
■ Briefly press the end key to end the menu.