AASTRA 600d Messaging & Alerting SIP-DECT User Manual EN - Manual (Page 20)

Sending Text Messages / Jobs
16
Menu: Outbox (List)
Sent text messages and jobs are saved in a list. Up to 15 entries can be saved in
your Outbox list. If the list is full, old messages are overwritten.
To open the list you can press a programmed key (see page 22) to access the
Outbox list (
).
You can also use the Text messages menu:
When idle, briefly press
. Select the Text messages > Outbox menu entry.
In this list the status of the messages is displayed by different icons:
Message info and options
In the Outbox list, you can display the complete message via the
softkey or
call up further options (e.g. forward message) via the softkey – see the chapter
entitled Using the Options Menu on page 18.
Menu: Use last text
The handset stores the last entered text (message text and address) in a temporary
buffer. This may help you in different situations:
■ You have closed the message editor by pressing the Esc softkey (e.g. to do an
outgoing call in between).
■ A message transfer failed, and you want to repeat the transfer.
■ You want to send the same information to a different recipient.
To send a message using the last entered text, proceed as follows:
■ When idle, briefly press . Navigate to the Text messages > Use last text
menu entry.
■ Press Ok. The display shows the text editor. Edit the message text if necessary
(see page 15).
■ Press the Next softkey. The display switches to the address editor showing the
address of the recipient to whom the used last text was sent.
in progress (message is on the way)
the message was successfully sent
sending failed