2) selected clips grid – EVS IP2Archive Deep Archive Manager Version 3.0 - October 2012 User Manual User Manual
Page 42
(2) Selected Clips Grid
This grid contains the clips that you have selected from the Purge Candidates grid.
Four buttons are provided allowing you to add and remove clips:
Button
Description
With this button you can add one or more clips to the Selected Clips grid.
With this button you can add all the clips to the Selected Clips grid.
With this button you can remove one or more clips from the Selected
Clips grid.
With this button you can remove all the clips from the Selected Clips grid.
With the Purge button
you can manually initiate the removal of the high-and
low-resolution files from the nearline storage and from LTO tape.
With the Refuse button
you can manually refuse the the removal of the high-
and low-resolution files from the nearline storage and from LTO tape. The clips will
disappear from this tab, and appear again in the Archived or Hires Removed tab.
If the Selected Clips grid does not contain clips, the Purge button is unavailable.
Note
Depending on your user rights, the Purge Candidates tab will be visible or not.
IP2Archive - User Manual - Deep Archive Manager Version 3.0
4. Interface
35