Filtering grid data by criteria, How to create a simple filter – EVS IP2Archive Deep Archive Manager Version 3.0 - October 2012 User Manual User Manual
Page 56
Only the records that contain one of the selected values are displayed in the grid. At
the bottom of the grid a filter bar appears displaying the applied filter.
3. In the filter bar, do one of the following:
•
Clear the check box next to the filter
to undo it. Select the check box to apply the
filter again.
•
Click
to undo the filter and close the filter bar.
•
Click
to open a drop-down list containing previously applied filters.
•
Click Customize to create a complex filter.
Filtering Grid Data by Criteria
Filters by criteria can be simple or complex:
•
Simple filters consist of one or two criteria and one Boolean operator (AND or OR).
•
Complex filters consist of more than two criteria and more than one Boolean operator
(AND, OR, NOT AND and NOT OR).
How to Create a Simple Filter
To create a simple filter, proceed as follows:
1. Hold your cursor over the header of the desired column, and then click the filter button
appearing in the right corner.
2. From the drop-down list, select the option (Custom…).
The Custom Filter dialog box appears. Here you can enter the criterion or the two
criteria you want to filter the values of the selected column by.
3. Select the desired comparison operator from the first drop-down list.
IP2Archive - User Manual - Deep Archive Manager Version 3.0
5. Archiving, Restoring and Purging Clips
49