Timecode color on the osd, How to setup the primary tc and user fields – EVS XTnano Version 10.04 - January 2011 Configuration Manual User Manual
Page 18
Issue
10.04.A
XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
10
Timecode Color on the OSD
Depending on the value selected for this setting, the timecode displayed at the
bottom of the user’s OSD will have a different color:
•
If the LTC timecode is selected, the timecode color will be white.
•
If the USER timecode is selected, the timecode color will be yellow.
H
OW TO
S
ETUP THE
P
RIMARY
TC
AND
U
SER
F
IELDS
To set up the primary TC or VITC field, proceed as follows:
1.
Press SHIFT + F2 to open the Setup screen.
2.
Use the TAB key to position the cursor on the field to edit.
3.
Use the LEFT and RIGHT ARROW keys to go through the possible values
for that field.
The value defined when you leave the field will be saved.