12 evs controller settings, 1 effect duration for take, 2 fast jog – EVS XTnano Version 10.04 - January 2011 Configuration Manual User Manual

Page 53: 3 pgm speed/var max, 4 lever engage mode, Evs controller settings, Effect duration for take, Fast jog, Pgm speed/var max, Lever engage mode

Advertising
background image

XTnano – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

45

3.12 EVS CONTROLLER SETTINGS

EVS Controller p.6.1
[F1]Effect duration for Take : 00s05fr
[F2]Fast jog : 20x
[F3]PGM Speed/Var Max : 050%
[F4]Lever engage mode : Direct
[F5]Second lever range : -100% <-> +100%
[F6]Recall Clip Toggle : Enable
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn

3.12.1 E

FFECT DURATION FOR

T

AKE

Possible range: 00s00fr to 20s00fr. Default: 00s05fr

This parameter defines the duration of the transition when using the TAKE key to
chain 2 sequences in PGM+PRV mode.

3.12.2 F

AST JOG

Possible values: 01 to 20 times. Default: 20x

This parameter sets the increment of the jump when in Fast Jog mode.

3.12.3 P

GM

S

PEED

/V

AR

M

AX

Possible values: 1 to 400%. Default: 50%

During playback, if PGM Spd or VarMax has been enabled in the secondary menu
of the Remote Panel, the lever range will be adapted so that:

The only playback value for any position of the lever other than 0, is the one
specified by this parameter in the setup (PGM Spd mode ON),

Or

The speed range defined by the lever is limited to the value specified by this
parameter (VarMax mode ON).

3.12.4 L

EVER ENGAGE MODE

Possible values: Direct (default) / Current Speed

The speed variation depends on the position of the lever.

Advertising