EVS XTnano Version 10.04 - January 2011 Configuration Manual - Manual (Page 28)

Issue
10.04.A XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
20
2.5.3 H
OW TO
M
ODIFY THE
T
YPE OF
TTL GPI
S
To modify the type of TTL GPIs, proceed as follows:
1. Press the TAB key to select the field on the first line of Page 4.
2. Press the LEFT and RIGHT ARROW keys to change the value.
Depending on the type defined, the lines 5 to 8 will automatically move from one
GPI section to the other.
For more information on the GPI IN settings, refer to section on the GPI IN
settings in the Setup menu chapter of the Multicam user manual.
2.5.4 U
SING THE
T
ALLY
F
UNCTION TO
C
REATE A
D
IRECTOR
’
S
C
UT
P
LAYLIST
I
NTRODUCTION
The Tally feature allows the users to automatically create a clip for each change
of camera performed on the director’s cut and to add all the clips to a playlist.
The clips are created automatically by the server as it receives GPIs IN from a
switcher when the director changes the camera angle.
H
OW TO
S
ET UP THE
T
ALLY
F
UNCTION
You will set up the Tally function on page 4 of the Setup Configuration.
To set up the tally function, proceed as follows:
1. Press the TAB key to select the Tally field value and press the LEFT and
RIGHT ARROW keys to set the Tally function to ‘ON’.
2. In the Add clips to PL field, specify the LSM ID of the playlist to which you
want to add the tally clips.
3. In the Clips guardbands field, specify how much the guardbands should be
in seconds.
4. In the GPIs IN section, for a given GPI,
• select the REC on which the director’s cut is performed
• define the ‘Mark Tly’ function on this GPI IN
The tally function is now active: When the server receives a ‘Mark tally’ GPI, an
IN point is marked on the corresponding record train (for ex. cam a). When a
second ‘Mark Tally’ GPI is received on a different record train (for ex. cam b), the
server marks an OUT point on the first record train (cam a) and an IN point on the
second record train. All the clips created this way are added to the defined
playlist.