EVS XTnano Version 10.04 - January 2011 Configuration Manual - Manual (Page 52)

Issue
10.04.A XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
44
The Lipsync parameter is the delay (in ms) between video and audio signals. A
positive value means video is ahead of audio. A negative value means audio
ahead of video.
This parameter is also available from the Channel Parameters option of the EVS
Maintenance menu. Changing the Lipsync value in the Setup menu will update it
in the EVS menu and vice versa.
Note
This adjustment is done during the record process. A new Lipsync value
will apply for the next recorded pictures only.
3.11.3 A
UDIO METERS ON
OSD
Possible values: Yes (default) / No
This parameter enables/disables the display of audio meters at the bottom of each
output monitor.
3.11.4 A
UDIO METERS ADJ
.(
DB
)
Possible range: -83.2 to 0 dB. Default: 0.0 dB
This parameter allows adjusting the sensitivity of audio meters on the OSD of the
output monitors. A positive value means that the meters will be more sensitive.
3.11.5 A
UX TRACK OUTPUT
Possible values: Prv / Prv&7-8/15-16 / PGM
This parameter defines to which audio outputs the Aux. Track of the playlist will
be played out of.
Value Meaning
Prv (default) The Aux. Track will use the audio outputs normally assigned to
the PRV channel. If no PRV channel is available, the Aux
Track will not be assigned to any audio output.
Prv&7-8/15-16 The Aux. Track will use the audio outputs normally assigned to
the PRV channel if there is one, plus all the audio outputs
from 7-8/15-16 that have not yet been assigned to another
channel. Use this option if you need an aux track without PRV
channel available.
PGM The Aux. Track will use the audio outputs normally assigned to
the PGM channel.