EVS XTnano Version 10.04 - January 2011 Configuration Manual - Manual (Page 32)

Issue
10.04.A XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
24
Note
The modifications of parameter values in this screen are not applied
when you leave the field. You need to select the APPLY option at the
bottom right of the screen and press ENTER to apply the modifications.
2.8 MULTIVIEWER SETTINGS (PAGE 10)
The Page 10 of the Setup Configuration module makes it possible to specify the
settings for a multiviewer connected to the server.
2.8.1 I
NTRODUCTION
When an optional multiviewer board is installed on the server, you can monitor
the server channels on a multiviewer.
The server is connected to the display device via one of the dedicated connectors
on the server backplane:
• HD SDI connector
• SD SDI connector
• DB15 configurable connector.
When the multiviewer board is installed, Multicam automatically detects it. This
means the multiviewer feature is directly available and the user can specify the
multiviewer settings. Otherwise, the message !Not Detected! is displayed
on the first line of Page 10.