EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 122)

Issue 6.0.B IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
112
8.2 Selecting Techniques
8.2.1 Selecting a Clip
To select an element of a clip, move the mouse onto it and click.
The color of the selected element will change to a dark blue (or as defined in Xedio
Manager, via Software > Parameter Profiles > (Xedio) CleanEdit: TL Colors tab).
To select multiple elements for a common operation, use the CTRL key for non-
contiguous elements and SHIFT key for contiguous elements.
8.2.2 Selecting Elements Depending on Nowline
or Mark Positions
The following table shows how you can select elements from the nowline, up to the
nowline or between the mark IN and mark OUT. In all cases, the selection will be
performed on entire elements, not from the mark positions:
To select all elements
(entire elements) …
Proceed as follows:
from the nowline
up to the end of the edit,
Click or press .
from the beginning of the edit
up to the nowline,
Click + or
press +
between the mark IN and mark OUT
Click + or
press +