EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 178)

Issue 6.0.B IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
168
3. Select the requested effect type in the (Left / Right) Audio Transition command.
The Audio Transition Effect window opens. In this window, you can still select another
effect. The definition of the transitions where the effect will be applied, in the Area
group box, cannot be modified.
4. In the Audio Transition Effect window, fill in the transition parameters to specify the
duration and position of the transition effect.
5. Click OK.
A blue vertical line is added on the transition where the effect has been added:
Once you have assigned the basic type of audio transition, you can zoom and adjust the
audio transition on the timeline, by clicking the Zoom button on the right hand side
of the required track. The track will then expand vertically across all of the audio tracks to
show the transition.
Note
You can also use the shortcut key + to directly call the Audio
Transition Effect window.