EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 142)

Issue 6.0.B IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
132
8.8.3 How to Go to and Select Cue Points
To go to a defined cue point:
•
Press the cue point number on the keypad, and press ENTER.
To select a specific cue point
•
Click the cue point on the Media bar.
The cue point will turn purple when selected.
8.8.4 Contextual Menu for Cue Points
The contextual menu of the Timecode bar gives some
additional options for the tags and cue points, when
they are selected.
To move the nowline to the cue point on which you have
right-clicked, select the Snap Nowline to Item
command. You can also press the number
corresponding to the cue point on the keypad and
validate with ENTER.
To move the cue point on which you have right-clicked
to the nowline position, select the Snap Item to
Nowline command.