Header maker, 1 introduction, 2 header maker tab overview – EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual User Manual
Page 212: Eader, Aker, Introduction, Header maker tab overview
Issue 6.0.B
IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
202
12. Header Maker
12.1 Introduction
The Header Maker tab provides a tool to insert a still clip at the beginning of an edit. This
still is created automatically and is based on information defined in a XML file. Besides
this predefined information, you can also enter custom information (like feed, location,
source, audio) in the Data editing area.
A specific (editable) profile describes the way in which the still clip has to be generated
(components and positions) as well as its length in the timeline.
The Header Maker tool supports 4:3 and 16:9 edits and takes care of the video aspect
ratio.
12.2 Header Maker Tab Overview
The Header Maker tab contains three main areas. They are highlighted on the following
screenshot and shortly described in the table below: