EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 204)

Issue 6.0.B IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
194
Adding Text Area and Defining Text Properties
How to Add Text
To enter text, proceed as follows:
1. Click the button from the Text Properties tab.
A text box appears in the Video Display:
2. Enter your text in the text box.
3. Define the text properties through the five sub-tabs of the Text Properties tab.
4. Click the button to validate your text.
Note
You can repeat steps 1 to 4 to associate several text areas to the same tag
area. They will then be displayed next to the same tag number in the tag list.
Possible Actions on the Text Area
You can move or resize the text area by dragging the area to the desired position and
dragging the edges to increase the box size.
The following buttons are present on the text area:
Button Description
Deletes the text area.
Validates the text and its properties. The text area is then surrounded by a
thin black line to identify it.
Cancels the editing performed since the last Validate action.