Hotchkis 20103 Chassis, Max Handle Bars, 70-81 Camaro F-Body - Manual (Page 4)

1970-1981 Chevy Camaro
Hotchkis Performance LLC.
4
5. With the Handle Bar Brace now in place the holes for the top mount on the
firewall can now be drilled. Once the first hole has been drilled place a bolt
in that hole while drilling the second to ensure the Brace does not move.
NOTE: Make sure that the top mount is resting on the firewall. If the fender bolt is
over tightened and the A-arm bolt has been tightened the top firewall mount may rise
off of the firewall. If the holes are drilled in this position the Handle Bar Brace will not
fit right.
6. Place the provided spacer under the top firewall mount.
NOTE: Be sure that the notched Brace and spacer are on the passenger side.
RESTING ON FIREWALL
SPACER UNDER MOUNT