Hotchkis 22436R MazdaSpeed3 Sport Sway Bar, Rear - Manual (Page 9)

6R
Install Centering Collars
To ensure the rear bar stays centered, Hotchkis provides split clamp-on collars. First, center
the bar left to right so that the end links are at equal angles. Next, install the collars on the
inside of the bushing edge. Make sure the collars are butted up against the bushings. Fully
tighten the 2 socket bolts on each collar.
7R
Double Check Hardware
Make sure all hardware is fully tightened before driving the vehicle. You are done with the
installation. The vehicle does not require an alignment after this installation.