Hotchkis 1110 Tubular Upper Control Arms, Geometry Corrected, Dodge B & E Body - Manual (Page 6)

1110 66-70 B-Body, 70-74 E-Body
Hotchkis Performance LLC.
6
8. Install Other Side of A-Arm
The trailing end of the A-Arm will be bolted into the stock mounting hole. Install
2 misalignment spacers.
Position the A-Arm so that the other heim joint is lined up with the mounting hole.
You will notice there will be gaps on each side of the joint. You will need to add
spacers (included in your kit) to take up the gaps. These gaps are not consistent
from car to car so you will have to use the appropriate thickness spacers on
each gap. You may have to use combinations of varying thicknesses to
achieve proper gaping. See below as an example.