Hotchkis 2285 C5 Corvette Sport Sway Bar Set w-o end links User Manual
Page 5
5 of 9
►Do not grease these Bushings. They are designed to be used
with out lubrication, they are dry lube impregnated.
◄
5.
Place the new bushings on the new Hotchkis Bar. Please look at the
factory bar and install in the same manner.
6.
Apply anti-seize compound to the two
frame mount bolts.
7.
Install the bar in the vehicle using the
original brackets, start the frame mount
bolts and nuts, remember, 3-4 threads.
8.
Reinstall the OEM metal end links in the
manner as removal. Fully tighten end link
hardware with blue thread locker (loctite).
9.
Tighten the upper frame mount with a
18mm socket and torque 35-40 ft-lbs.
10.
Tighten the lower a-arm bolts with a
18mm wrench and 15mm socket and torque 60-65 ft-lbs.
11.
Double check that you tightened everything.
4
7
13