Hotchkis 19105 300C SRT8 & Charger SRT8 Sport Coil Springs User Manual
Page 8
Advertising
4)
Pull back the plastic splash guard and remove the bolt that holds the brake line to the frame using a
10mm wrench or socket.
5)
Next, you will need to drop the exhaust system for clearance. Unbolt the mid-brace removing the 4
bolts using a 13mm socket. Spray the rubber hangers in the picture with WD-40 and slide the rubber
hanger off the exhaust support. Unbolt the remaining rear hangers using a 13mm socket. Be careful,
for the exhaust will drop down once these bolts are out.
Advertising