Hotchkis 22104R 1993-2002 Camaro-Firebird Adjustable Rear Sway Bar - Manual (Page 5)

93+ F-Body rear & front sway bar
2204_inst.doc
Page 5 of 8
10. The bushing brackets attached to the axle tubes have slots and the fore/aft
position can be adjusted slightly. Adjust the position so that the end link is
as upright as possible. For example, if you have the end links attached to
the softest setting (closest to the end), you’ll want to shift the bushing
brackets towards the rear of the vehicle as much as possible. Once you are
in position, tighten the U-bolts completely.
11. Double check that all fasteners are tightened.
Your installation is finished. Enjoy your new sway bars!