Hotchkis 2003 1993-1997 GM F-Body Strut Tower Brace Black - Manual (Page 2)

NOTE : On some later vehicles, you may have to grind a small recess to fit the space.
5) Put the brackets over the shock tower studs, and install the original nuts. Make sure you
have the bracket in the correct orientation. The brackets should be almost parallel with
the firewall of the vehicle.
These photos were taken of the left side (driver’s) of the vehicle.
DO NOT fully tighten the nuts at this stage. Loosely tighten them to secure the brackets.
6) Install the shock tower brace in the brackets. Make sure the offset side of the brace
goes back under the windshield. On SS Camaros, this will go behind the air box. Leave
the hardware loose at this stage.