Hotchkis 22834R BMW E90 - E92 Rear Sport Sway Bar - Manual (Page 3)

6f
Install Hotchkis Front Sway Bar
Install the new sway bar in the exact reverse order as removal. Make sure to lube the new
urethane bushings with the supplied grease. Use the included Hotchkis bushing bracket. It is
slightly more difficult to install the Hotchkis bar due to the larger diameter. If you are unable
to find the “sweet spot” to rotate the new sway bar into location, you can jack up the car,
remove the wheels, disconnect the tie rods and the bar will fall right in. Use the supplied
blue lock-tight on the end-link nuts. Make sure to fully tighten the end link nuts.