Hotchkis 22414R Scion xA-xB Competition Rear Sway Bar User Manual

Hotchkis For the car

Advertising
background image

04 – 07 Scion xA/xB


Hotchkis Performance LLC.

1

22414R

Competition Rear Anti-Sway Bar

04-07 Scion xA/xB

Thank you for your purchase from our new line of Scion parts.

Please call us at (877) 4NO-ROLL if you have any questions

regarding the service or installation of your Hotchkis Performance products.

1) Securely block the front wheels of the vehicle. Jack up the vehicle and support it with jack stands.

2) Locate the two holes on the bottom of the rear axle, right by the lower shock mount.

3) Insert the 3/8” bolts (with flat washer) into the axle tube. The bolt closest to the end is easy. The

other bolt will need some patience. One method that works fairly well is to fish some string through

the hole and out the end of the axle tube. Tie the string to the end of the bolt. Don’t forget the

washer. Once tied, pull the string to bring the bolt forward. Grab a telescoping magnet rod and use

it to tilt the bolt head up. Doing both of these maneuvers should easily allow the bolt to fall through

the hole.

Advertising