Hotchkis 1202AA Trailing Arms, Upper, Double Adjustable, 68-72 GM A-Body User Manual
Page 5
Advertising
8. Now here comes the difficult part; removing the stock Can Bushings. These are the bushings that connect
the aft end of the upper trailing arms to the differential. You may luck out and be able to hammer them
out with a dead blow hammer, but if you are not able to use this method please do the following.
- First step is to drill out the rubber bushing. Drill a sequence of holes in a circular pattern in the rubber.
- Once the rubber surrounding the inner metal sleeve is pretty much drilled out, you should be able to
punch out the metal sleeve.
Advertising