Hotchkis 2281R Sway Bars, Rear, 78-88 GM A, G-Body, Extreme User Manual
Page 3
Advertising
2281R 1978-1988 GM A Body
Hotchkis Sport Suspension LLC.
3
carefull pull the brake line away from the axle tube to give enough clearance for the U-
bolts.
Next, apply the provided lube on the inside surface of the polyrethane bushings. Pop
the bushings onto the sway bar. Slide the bushing brackets onto the bushings.
Apply a small amount of anti-seize to the threads of the U-bolts. Next position the axle
bracket up against the axle tube. Raise the sway bar up to meet the axle bracket and
allow the U-bolts to poke through the bushing bracket. Fasten the assembly together
with the provided nut and washer. Do not fully tighten.
Advertising