Hotchkis 1760 Quick Release Billet Hood Pin Kit User Manual
Page 4
Advertising
With the holes drilled out you are ready to mount the hood bases onto the hood. We provide you with
stainless steel countersunk screws, washers and nylock nuts.
Lower the hood slowly and confirm that the hood pin lines up with the center hole of the base. Due to
varying thicknesses of hoods, there may be excess screw threads protruding through the bottom of the
hood. If there is a clearance issue when the hood is closed, you may cut the excess screw threads
with a cut-off wheel.
Advertising