Hotchkis 22800R Mini Cooper Sport Rear Sway Bar - Manual (Page 7)

shared bracket. The other 2 (again, 1 per side) are located just inboard. You’ll
see one just above the stability sensor on the left upper link.
7/
The sub-frame should be loose. Apply pressure to the sub-frame so that
the bar (without the brackets and bushings) can be pulled out from one side.
8/
Once the stock bar is out, slide the Hotchkis bar in without the bushings
and brackets attached. Once the bar is in the approximate stock location, use
the remaining grease on the inside of the rear bushings and slip them over the
bar. Then install the supplied bushing brackets with the grease fittings pointing
to the outside.