Hotchkis 1106 Tubular Upper Control Arms, GM 70-81 F-Body - Manual (Page 4)

7
Get an Alignment
After this installation, you will need to get a professional alignment done. Recommended front
alignment specs:
Camber: -1° to –1.5°
Caster: +4° to +5°
Toe-in: 1/16”
Special Note for 1102 kits: At full droop (suspension hanging all the way down) and at full
steering lock left or right, your tires may contact the a-arms slightly. This is nothing to worry
about since the suspension does not experience this type of situation under normal driving
conditions.