Hotchkis 1214 Trailing Arms, Upper, Double Adjustable, 65-66 GM B-Body - Manual

1214 DOUBLE ADJUSTABLE UPPER TRAILING ARMS
65-66 CHEVROLET B-BODY
Thank you for your purchase from our line of classic Chevrolet B-body suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis
Performance products. Visit us online @ www.hotchkis.net
This installation will require:
 A hydraulic jack, jack stands
 The following wrenches or sockets: 15/16”
 Adjustable wrench (1-1/4” – 1-9/32” range of adjustment) for jam nuts.
INSTALLATION OF HOTCHKIS PERFORMANCE
DOUBLE ADJUSTABLE TRAILING ARMS
1) Securely block the front wheels of the vehicle. Use a jack to raise the rear of the vehicle and
support with jack stands to the frame.
2)
Use a 15/16” wrench or socket to loosen and remove the stock upper trailing arm hardware. For
Vehicles with two upper arms, Remove and replace only one arm at a time
as this will help
keep the axle aligned properly and make it easier for removal and replacement. You may
discard the stock hardware and upper arm(s).