Hotchkis 22427 2002-2008 WRX Wagon Competition Sway Bar Set User Manual
Page 2
Advertising
3)
Use a 12mm wrench or socket to remove the four bolts holding the skid plate in place. Retain
the hardware and skid plate for later re-installation.
4)
Loosen and remove the bolts holding the front sub frame in place (observe the diagram). The
front sub frame is not weight bearing, and can be easily removed by one person without having
to support the engine. Retain all hardware for later re-installation. Remove the sub frame when
unbolted.
Advertising