Hotchkis 22429 2008 Scion xB Sport Sway Bars - Manual (Page 4)

8F
Install Hotchkis Sway Bar in Reverse Order
Install the new sway bar in reverse order. Make sure to grease the new bushings with the
supplied silicon grease. Note the position that the new bushings must be installed in the sub
frame. Do not completely tighten the lower control arm bolts until the vehicle is at ride height,
and torque to 140 ft lbs. If the bolts are not properly tightened noise and damage to the
bushing will occur.
9F
Double Check Hardware
Make sure all hardware is fully tightened before driving the vehicle. You are done with the
front installation. Continue to the Rear Installation.
10F
Sway Bar Stiffness
50% Stiffer than Stock