Hotchkis 22826R BMW E46 M3 Sport Sway Bar, Rear - Manual (Page 5)

INSTALLATION OF HOTCHKIS REAR SWAY BAR
1)
Drive the rear of the vehicle onto floor ramps and securely block the front wheels of the vehicle. If
ramps are not available, use a jack to lift up the rear of the vehicle and use jack stands to support it. Do
not remove the rear wheels during installation for safety
2)
Once the vehicle is raised, take a moment and observe the stock rear bar and the way in which it is
mounted.
3)
Free the stock end links from the upper mount within the cast suspension arm for both the driver and
passenger sides using a 17mm socket for the top and 13mm socket for the under-side of the arm. You
will not re-use the stock end links.