Hotchkis 12425 Scion TC Sport Rear Camber Links User Manual
Installation of hotchkis rear upper camber links
Advertising
Rear Upper Camber Link (12425)
Scion tC
Thank you for your purchase from our new line of Scion tC parts.
Please call us at (877) 4NO-ROLL if you have any questions
regarding the service or installation of your Hotchkis products.
Visit us online @
Tools Required for this Installation
- Hydraulic jack, jack stands, torque wrench
- Ramps
- The following sockets or wrenches: 17mm, 19mm
- 1” open end wrench, crescent wrench
INSTALLATION OF HOTCHKIS REAR UPPER CAMBER LINKS
1)
Securely block the front wheels of the vehicle. Use a jack to lift up the rear of the vehicle and use jack
stands to support it. Remove the rear wheels.
Advertising
Table of contents
Document Outline
- Rear Upper Camber Link (12425)
- Rear Upper Camber Link (12425)
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?