Hotchkis 19110 Coil Springs, Set, 10-13 Camaro, 1" Drop - Manual (Page 5)

2010 Chevy Camaro
Hotchkis Performance LLC.
5
9. Remove the stock springs.
10. Put in the new Hotchkis spring.
NOTE: Make sure the end of the spring is up against the stopper in the rubber spring
isolator. If the spring is not seated properly you will not achieve the correct ride height.
OPTIONAL TIP: The lower rubber spring isolator is held in place with 3 small dowels that poke
through the strut seat. The dowels barely keep the isolator clocked correctly under
heavy turning load. To ensure the isolator stays in place, you can clean the surfaces
between the lower rubber isolator and the strut seat with brake cleaner. Then apply a
spray adhesive (3M 90) to those surfaces, let adhesive tack up, and re-install lower
isolator. This basically keeps the rubber in place on the strut.
NO GAP HERE