Hotchkis 2291 2007 - Present GM 1500 SUV Sport Sway Bar Set User Manual
Page 9
2007+ GM Escalade/Tahoe/Avalanche 2wd/4wd
Hotchkis Performance LLC.
9
In some instances due to vehicle tolerances and variations in the way you open up the
clevis bracket in step 4, the bar may seem too wide. Do not worry, once you have the
hardware fully tightened the dog bone end links will straighten out vertically. If vehicle
tolerances seem too great you can add a 7/16” USS washer between the sway bar end
and the dog bone bushing to fill some of the gap. This 7/16” USS washer is included in
your kit.
So, if there is too much gap between the sway bar end and the dog bone end link,
arrange the hardware as shown in the picture below.
End Link Hardware Order If Gap is present:
½” Bolt
Sm. Washer
Sway bar
Lg. Washer (Use 2 here if needed)
Dog Bone End Link
Lg. Washer
Nut
6.
Double Check Fasteners
Make sure all bolts are fully tightened before driving the vehicle. You are now finished
with the sway bar installation.