Hotchkis 2236RSPK Sway Bars, Rear, Mounting Upgrade, 70-81 GM F-Body - Manual (Page 8)

1967-1969 GM F Body
Hotchkis Performance LLC.
8
You’re given new hardware for attaching the dog bone end links to the sway bar. Use
the bolts, nuts, and washers from the #T1712 hardware kit.
Once the passenger side is completely mounted together, you can now figure out
where the other frame rail reinforcement plate goes on the driver side. Mock up the
driver side dog bone end link onto the sway bar and mark where the bottom hole
should be. Again, use the reinforcement plate as guide to mark the upper hole. Drill
the holes in the same manner as before.
You can remove the mounting tabs that are no longer in use.